Wacker Neuson DPU 6055, Руководство оператора

Страница: 27 / 44

T00797GB
25
MAINTENANCE
Maintenance schedule
Component Maintenance work Maintenance interval
External hardware Check for tightness. approx. 8 hours after
initial start-up
Drive engine First oil change and filter. 25 hours after initial
start-up
Machine cpl. Run a visual check to see that everything is daily
complete and undamaged.
Air filter Check area around combustion air intake and also
air filter service indicator.
Drive engine Check oil level, if nec. top up oil.
Centre pole height Regrease. weekly
setting, transport lock
Fuel tank
Check water separator.
V-belt Check V-belt, if. nec. replace. monthly
Protective frame, Check attachment screws for tight fit.
central lifting point
Tow-bar head
Check oil level, top up if necessary.
Exciter Oil change. every 250 h,
or latest every
6 months
Drive engine Oil change, change oil filter. every 250 h
Keep cooling fins free of dirt, clean dry.
Check accessible hardware.
Battery Check acid level, if nec. top up with distilled water.
Valve clearance Cold engine: Check valve clearance, and adjust
if necessary.
Inlet valve 0,1 mm - outlet valve 0,2 mm.
Fuel filter Change filter. every 500 h
Air filter Replace filter insert.
Fuel injector Clean, adjust if necessary, repair or replace. every 1500 h
Injector valve Clean, adjust or replace if necessary. every 3000 h