Wacker Neuson DPU 6055, Руководство оператора

Страница: 20 / 44

T00796GB
18
OPERATION
Starting the engine with the safety starting crank
1. Turn the throttle control lever to the load position 1/2 - 3/4.
2. Turn the decompression lever (2) all the way to „f“.
At this point automatic decompression lever engages with an audible click, and the engine is ready to start.
3. Put the ignition key into ignition switch (25) and turn it clockwise into operating position (the charge control
lamp (27) lights up and the buzzer will be heard).
4.
☛
ATTENTION! Check to see that the safety starting crank is in good shape and clean!
Broken handle pipes, worn cranking bolts, etc. must be replaced!
Lightly grease the gliding area located between the safety starting crank and the guide
bush (protective casing).
- Stand sideways to the engine.
- Always grasp the handle pipe (h) with both hands.
f
e