Wacker Neuson DPU 6055, Руководство оператора

Страница: 16 / 44

T00796GB
14
OPERATION
Starting requirements
1. Engine oil
Check oil level on oil dipstick (19), if necessary top up with HD brand oil SAE 10 W-40 using the filler
nozzle (21).
☛
ATTENTION! The machine must be level and the engine stopped before proceeding with the oil level
check.
2. Fuel
When pouring diesel fuel into the fuel nozzle (20), maintain absolute cleanliness. Impurities in the fuel can
cause breakdowns in the injection system and premature clogging of the fuel filter.
☛
ATTENTION! - Only refuel the machine when it’s engine is stopped.
- Never refuel the machine close to open flames or ignitable sparks and do not smoke.
- Only use pure, clean fuel and clean filling vessels.
- Do not spill any fuel.
3. Mechanical oil pressure control
It is necessary to reactivate the mechanical oil pressure control in the following cases:
- after the initial filling - first filling - of the fuel tank or if the tank has run dry.
- in the case of an automatic engine stop due to an inefficient
engine oil supply.
- after freeing the engine when in presence of extremely low
temperatures.
1. Fill up fuel tank.
2. Check engine oil level.
3. To activate depress hand lever „d“ for approx. 5 seconds.
4. Check to see that the engine does not leak.
5. Start engine.
☛
ATTENTION! Check oil level every 8 to 15 operating hours in spite of the mechanical oil pressure con-
trol.
☛
ATTENTION! - Never let the engine run in closed or badly aired spaces due to danger of poisoning!
- Before starting the engine always make sure that nobody is in the danger area of the
vibratory plate and also check to see if all the safety devices are installed.
- Never use starter sprays to start the engine.
d