WAC Lighting 5021-CCBBR, Инструкция по установке

Страница: 5 / 22

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JAnuAry, 2016 5
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
ACCESSORIES:
• rock Guard – Protects fixture front glass from large falling
objects.
To Install (
Fig. 11
):
1. Unscrew the Face Plate Mounting Screws.
2. Put the Rock Guard on top of the fixture face plate,
make sure to match up the mounting index arrow on the
fixture and rock guard.
3.
Use the same Face Plate Mounting Screws to mount the
Rock Guard onto the fixture.
• Color Lens – Comes in red, blue, green and amber lenses
change the light color of the fixture. ( Fig. 12 )
• Hex Louver – Uses to reduce the glare of the fixture and
control peripheral light.
Note:
Both Color Lens & Hex Louver are installed in the same
place.
To Install (
Fig. 12
):
1.
Unscrew the Face Plate Mounting Screws.
2.
Take out the Face Plate, Gasket & Front Glass.
3. Drop the Color Lens/Hex Louver into the fixture housing.
4. Put everything from Step 2 back to the fixture housing
and tighten the screws.
•
Concrete Pour Canister & Cap – used to install fixture in
concrete pour applications.
To install (
Fig. 13
):
Please visit the previous Concrete Pour Installation instructions.
INSTALLATION INSTRUCTION
In-Ground Color Changing
5031-CCBBR
Fig.11
Fig.12
Fig.13
Fixture
Mounting Index Arrow
Rock Guard
Face Plate
Mounting Screws
Face Plate
Mounting Screws
Face Plate
Gasket & Front
Glass
Plastic Cap
Concrete Pour
Canister
Color Lens
Hex Louver
OR