WAC Lighting 5021-CCBBR, Инструкция по установке

Страница: 14 / 22

6 ilumenight setup instruction
4. COMMISSIONING SCREEN
4.1 Commissioning Controls
The lamp can be commissioned by dragging the sliders left or right, tapping on either side of the
slider circle to move at preset values, or pressing and holding along the slider for one second to bring
up a numerical keypad for direct entry of the value. When using the direct entry option, you can also
use the two arrows located on the top left of the numerical keypad; tap on either arrow to
automatically increase or decrease the value.
4.1.1 Dimming
The lamp (or the group) can be dimmed from 100–1%, in
increments of 1%. The dimming value is shown at the far left.
Tapping on either side of the slider moves the lamp in 10%
increments.
Pressing and holding along the slider will bring up a keypad for
direct entry of the dimming percentage. Enter the percentage
and then touch “Done”.
4.1.2 CCT
The CCT can be changed in increments of 25K.
The CCT range of the lamp (1650 – 4000K or 2700 – 6000K)
is detected automatically.
Tapping on either side of the slider moves the lamp in
25K increments.
Pressing and holding along the slider will bring up a keypad for
direct entry of the CCT. Enter the CCT and then touch “Done”.
NOTE: Only lamps of the same CCT range can be grouped
together.