W6 WERTARBEIT N 656D Free Arm Скачать руководство пользователя страница 9

Страница: 9 / 102

Unpacking

Assembling

your

verlocker

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

Assembling

your

verlocker

In this chapter you will find information regarding the assembly of the over-
locker:

•

Unpacking (

age

•

Setting up (

age

10)

•

Assembling your

verlocker (

age

10)

•

Unplugging the

device from the mains

(

age

14)

2.1

Unpacking

During the course of using the device, you will be responsible for shipping

it to specialist workshops for inspection.

To avoid any damage, please

send the overlocker in

its original packaging. Therefore we recommend

you keep the packaging material, including the styrofoam.

Please

ensure

that all packaging material is stored beyond the reach of children.

DANGER

There is a risk of suffocation

he overlocker is

delivered

in a plastic bag.

This plastic bag

may pose a suffocation hazard to children.

►

Cut up the plastic bags.

►

Take care that children do not play with the packaging material.

CAUTION

The overlocker is supplied with a needle installed

There is a risk of being pricked by the needle.

►

Please mind the

needle

when unpacking.

Please follow the steps below

Unpack the overlocker on a suitable surface.

Unpack the thread guide bar with the thread guide rack.

Cut up all plastic bags that are supplied with the overlocker.

Store the packaging material in a secure place beyond the reach of chil-
dren.

Should you wish to dispose of it, do not simply throw the packaging
material away but send it for recycling.

The overlocker has been unpacked

Содержание WERTARBEIT N 656D Free Arm







































































































Результаты поиска

Содержание WERTARBEIT N 656D Free Arm

Отзывы:

Похожие инструкции для WERTARBEIT N 656D Free Arm

Бренды по названию

Популярные бренды

W6 WERTARBEIT N 656D Free Arm, Руководство пользователя

Результаты поиска

Содержание WERTARBEIT N 656D Free Arm

Отзывы:

Похожие инструкции для WERTARBEIT N 656D Free Arm

Бренды по названию

Популярные бренды