W6 N 8000, Инструкция по эксплуатации

Страница: 22 / 64

20
BOBBIN SETTING
A. REMOVING THE BOBBIN
1. Pull the bobbin cover latch to the right and
remove the bobbin cover.
2. Lift up the bobbin from the machine.
B. WINDING THE BOBBIN
1. Open the top cover.
2. Place the bobbin on bobbin winder spindle
so that the groove on the bobbin fits to the
spring on the spindle.
Push bobbin to the right to engage bobbin
winder. (Screen will indicate the bobbin
winder mode.)
3. Set the spool of thread on spool pin so that
the thread unrolls from the front of the spool.
Set the spool cap on spool pin as far as it
will go.
a: Reverse spool cap direction according to the
size of spool.
b. Use the small spool cap when you use
cross wound thread. Leave small opening
between cap and spool as illustration.
4. Hold thread in both hands and hook thread
to the guide from front opening.
5. Bring thread towards the rear of the machine
and pass through the thread guide from left
to right.
6. Bring thread to the right and pass thread
through the thread guide from rear side.
Pass thread under tension disc in counter
clockwise direction.
20