W6 N 8000, Инструкция по эксплуатации

Страница: 44 / 64

42
TWIN NEEDLE SEWING
Interesting decorative stitches can be
produced by using twin needles and
threading the machine with two different
colors of thread. Always make test samples
to help you determine the settings best suited
to a specific purpose.
All patterns except Buttonholes, bar-tack and
darning, may be sewn with a twin needle.
Regular or Satin Foot
CAUTION: To prevent accidents.
a. Use only needle designed for this
machine. Other needles may break.
b. The needle threader cannot be used.
Thread each needle eye by hand.
1. Remove the single needle and insert twin
needle.
2. Thread first thread as usual following
threading route.
3. Thread the left needle eye by hand from
front to back .
4. Place the Extra Spool Pin with felt washer
into the hole.
5. Place second spool of thread.
6. Thread second thread the same as first.
7. For better sewing results, do not place the
thread into the needle bar thread guide.
Thread right needle eye by hand from
front to back.
8. Touch the home button and setting button.
9. Touch the twin needle ON button.
Twin needle mark will be indicated on the
screen.
The stitch width will be reduced
automatically.
CAUTION: To prevent accidents.
If you did not set to the twin needle mode,
needle may hit the needle plate and break.
10. Always test sew selected stitch,
11. Sew project.
NOTE:
When you restart the power, twin needle
mode will be cleared. (Twin needle mark will
disappear.)
All patterns except
Buttonholes, bar-tack
and darning