W & A Delta Plow, Руководство пользователя

Страница: 32 / 70

32
308.708.8185 | Info@WAMfgco.com | Rev. 11/20
RETURN TO INDEX
1. Unless the implement was folded, with the currently hitched tractor, only a short time ago, check for evidence
of oil leaks. Check the ground at hitch connections, hose fittings and under cylinders.
2. Be aware of vertical and horizontal clearances needed to unfold the implement.
3. Put tractor in Park with parking brake engaged.
4. Verify that the wing lock pins are not installed in the lower lock holes (page 30).
5. Clear all persons from on or near the implement.
6. Use the tractor 3-point hitch to raise the implement slightly (so that the row units are off the ground).
7. Slowly move fold circuit lever(s) to Extend cylinders. Observe the unfold operation.
8. Wait for both wings to reach the fully unfolded position. Set tractor remote(s) to Neutral to lock at unfolded.
UNFOLDING
DANGER
TIP OVER/CRUSHING HAZARD AND EQUIPMENT DAMAGE RISK:
Never unhitch, park, or store a partially folded implement. A partially folded implement
could topple backward or forward immediately or at a later time, causing serious injury
or death and certain severe equipment damage. When unhitched, the implement is
supported at the rear only by row unit tools and spring tension. Slopes, soft soils, and
soils later softened by rain are particularly dangerous.
EQUIPMENT DAMAGE RISK:
Do not leave a partially folded implement lifted for extended periods of time. This places
a needless unbalance load on the tractor’s lower lift arms.
CRUSH HAZARD - WARNING
• Keep clear of moving and shifting equipment. Equipment can move or shift; can
result in death or serious injury.
• Hazards may include, but are not limited to, folding wing movement, raised equipment
movement and shifting, etc.
Unfold the implement for adjustments, field operations, maintenance, parking and storage.
OPERATION
CAUTION
WARNING