43
5.1.2. Editing, cloning and deleting tasks:
Once the task is listed in the protocol, you can edit its parameters by selecting the task,
right-clicking
on it and selecting
Edit task
, or by double-clicking the task. The
Edit task
window
opens, where you can modify the task’s parameters and store them.
You can clone a task by
right-clicking
on the desired task and selecting
Clone task. Add task
window opens, where you can rename the task and change the parameters if desired.
When done,
add the task to the protocol by clicking
Create
button. The task is added
immediately after the
original task.
You can delete tasks from the protocol by
right-clicking
on the desired task and selecting
Delete task.
Alternatively, you can select a task in the protocol and click the left-arrow. When
deleting a task, a pop-up window appears, where you can confirm task deletion.
5.1.3. Pipette volume indicator:
As you build a protocol, the pipette volume indicator will display how much of the
pipette’s
maximum volume is used at the end of the protocol with indicator bars (green to red color). The
exact volume is also displayed next to the color bars (displayed in microliters). If you click on a
particular task, a rectangle will mark the volume of the current task (blue rectangle indicates
aspirating, and red rectangle indicates dispensing of volume).
If the volume in pipette exceeds the maximal volume, or is below the minimal volume of
the pipette, the pipette volume indicator will be surrounded with a red rectangle.
Numbers displayed next to colored bars
represents volume remaining in the pipette at
the end of protocol (displayed in microliters)
Содержание VWR 10
Страница 31: ...31 19 REPLACEMENT PARTS COMING SOON...
Страница 32: ...32 APPENDIX 1 EXAMPLE OF A PERFORMANCE CHECK example with VWR10 at 1 l...
Страница 33: ...33 APPENDIX 2 Z FACTOR...
Страница 52: ...52...
