VWR International VWR 10, Инструкция по эксплуатации

Страница: 17 / 55

17
Personal label
– Name and/or application tag:
VWR Electronic Pipette offers you the possibility
to mark your pipette. You can
personalize your pipette with a name tag and/or an
application tag:
Window-tag:
• Remove the window by inserting a small screwdriver
in the access slot.
• Position the name tag on the pipette
• Clip the window back in place.
10
GOOD LABORATORY PRACTICE FEATURES
VWR Electronic Pipette is fully compliant to ISO8655 standard and is CE marked .
VWR Electronic Pipette includes the following GLP features.
General
• Lockable volume.
• Useful volume-range is printed on the push-button.
• Volume range is displayed on the screen.
• Serial number is engraved on the body (handle) of the pipette and encoded in the firmware.
• Bar code: on the box
• Personalization by nametags (for marking application and/or user name), refer to chapter 9.
Cycle counters
• From last volume setting (to count the number of cycles in the current “run”).
• From manufacture and since the last service (refer to chapter 13).
• By indicators (R1, R2, R3 … Rx) each time pipette is readjusted.
• Maintenance intervals can be specified by weeks or number of cycles elapsed.
Alarms
• Low battery warning.
• Service is overdue warning (refer to chapter 13).
• Service alert can be set “On” or “Off”.
11
VWR ELECTRONIC PIPETTE POWER MANAGEMENT
The VWR Electronic Pipette battery has been designed to ensure around 900 pipetting cycles
(around 750 for Multichannel models) at maximum speed between two charge cycles (approx.
2h30 of use continuously). For service continuity when needing more
capacity, VWR Electronic Pipette can also be used while charging with the same performance as a
fully charged pipette!
Window-tag