The Wrap Tracker is a 3-DOF capable tracker with compass. It plugs into the back of the display
module and communicates with your computer through a USB cable connecting your Windows
computer to the Controller.
To install the Wrap Tracker:
!
Plug the tracker into the port on the back of the display module, above and to the right of
the right-hand display.
!
Calibrate the Tracker using VR Manager.
Note:
Although the tracker connector looks similar to a mini-USB connector, it is not. Do not attempt
to connect a USB device or cable into this port or plug the Tracker into a USB port.
Note:
Tracker support is required in an application for this device to work. Programming examples
are demonstrated in the Vuzix SDK to assist in embedding support code. (For additional
information, see “Developer Tools and Support” in the following chapter.)
The Tracker requires calibration before being used and periodically thereafter. If you connect
your Tracker to a different computer, you should reset or zero the Tracker’s gyro. If you move the
tracker to a different location or rearrange nearby electronic devices, we suggest re-calibrating the
tracker as the resulting magnetic field changes may adversely affect its calibration.
Tip:
Periodically open VR Manager, face the eyewear forward, and press “Set Zero” to re-center the
home position.
Refer to the “VR Manager” section for detailed information and instructions on calibrating the
Tracker.
A 2000mA USB charger is provided with the STAR 1200XLD. This charger is compatible with
most types of electrical outlets from around the world.
See the separate USB Travel Charger Adapter User Manual for important safety information and
instructions on changing its plugs.
