A variety of electrical plug adapters are provided, changeable by pressing the tab in the
bottom corner of the charger.
!
Connect the Controller to the USB charger using the “mini-B” USB cable provided.
!
Allow the Controller to charge for a minimum of 4 hours for its first charge.
Tip:
Once charged, the Controller can power the STAR AR eyewear for a period of time without a
USB connection. For continuous use connect the Controller to the USB charger.
!
Plug the stereo earphones into the jacks above each of the eyewear displays.
The noise-isolating earphones are not required for the proper operation of the eyewear.
Unplug the earphones if you prefer to use an alternate speaker system.
Note:
Be sure to adjust the volume to a safe and comfortable level before inserting the earphones
into your ears. The volume is controlled through the “+” (plus) and “–” (minus) buttons on the
Controller.
Note:
When you connect your STAR system to a Windows based computer Windows, it will detect a
new USB speaker system and automatically configure your computer to output sound to the
Wrap earphones.
