Fig. 68
2.
Remove the TOP FRONT COVER.
3.
Loosen the screws/bolts that secure the upper
door brackets just enough to allow door
movement.
Figure Shown below (Left Side) is ending at
Serial Number 481907145.
Fig. 69
Figure shown below (Left Side) is starting at
Serial Number 481907146.
Fig. 70
4.
Move the door until proper alignment is achieved
then tighten the screws/bolts on the upper door
bearing hardware.
5.
Repeat STEP 3 and STEP 4 on the opposite
door, if necessary.
6.
InstallTOP FRONT COVER.
SG4 & SG6 Series Full Size Gas Convection Ovens - SERVICE PROCEDURES AND ADJUSTMENTS
Page 37 of 56
F35626 Rev. B (1118)
