BLOWER AND MOTOR Starting at
Serial Number 481913936
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
Shut off the gas before servicing the
unit and follow lockout / tagout
procedures.
1.
Remove RIGHT SIDE PANEL(S).
2.
Disconnect motor harness (1, Fig. 28).
Fig. 28
3.
Pinch cord grip together to remove from rear
panel.
Fig. 29
4.
Push motor wiring harness/cord out hole in rear
panel.
5.
Remove racks.
6.
Remove screws securing "snorkel" and remove
snorkel.
Fig. 30
7.
Remove blower baffle screws (2, Fig. 31) if
applicable.
SG4 & SG6 Series Full Size Gas Convection Ovens - REMOVAL AND REPLACEMENT OF PARTS
Page 17 of 56
F35626 Rev. B (1118)
