Fig. 47
6.
Pull lamp housing out of oven cavity.
7.
Disconnect wires.
Fig. 48
8.
Reverse procedure to install.
NOTE:
Verify gasket (1, Fig. 49) is flat on lamp cover
and not damaged.
Fig. 49
DOOR SWITCH
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
Remove the top front cover as outlined under
Covers and Panel.
2.
Disconnect the lead wires to the door switch.
Fig. 50
3.
Remove the switch.
SG4 & SG6 Series Full Size Gas Convection Ovens - REMOVAL AND REPLACEMENT OF PARTS
Page 23 of 56
F35626 Rev. B (1118)
