47
Telephone operation
handset speakerphone
During a call, press to switch between speakerphone and normal
handset use.
When in speakerphone mode, if no keys are pressed within five seconds, the
keypad is locked automatically. Press the
uNLoCK
softkey to use the keypad.
Volume control
During a call, you can adjust the listening volume on the handset or
telephone base.
If this is a cell call and the volume is too loud or quiet, try changing the
volume on your cell phone. On some cell phones, changing the volume on
the cell phone effects your cell call volume on the
LS6245
handset.
To adjust the listening volume of the handset:
Press
/VoL+/
or
CID
/VoL-/
on the handset while on a call.
To adjust the listening volume of the telephone base:
Press
/VoL+
or
VoL-/
on the telephone base while on a call.
Silence the ringer
When the home or cell line is ringing, you can temporarily silence the ringer
of the handset without disconnecting the call. The next call rings normally at
the preset volume.
To silence the ringer of the handset when there is an incoming call:
Press the
SILeNCe
softkey or
oFF/
CLeAR
on the handset and
Ringer mute
appears.
To silence the ringer of the telephone base when there is an
incoming call:
Press the
SILeNCe
softkey or
CANCeL/
on the telephone base.
Ringer mute
appears.
Mute
The mute function turns off the microphone. You can hear the caller, but the
caller cannot hear you.
To mute a call on a handset or the telephone base:
Press the
MuTe
softkey to turn off the microphone. The screen shows
Muted
for a few seconds and
MuTe
appears until the mute function is
turned off.
To un-mute a call on a handset or the telephone base:
Press the
uNMuTe
softkey to resume the conversation. The screen
temporarily shows
Microphone oN
.
•
•
•
•
•
•
