41
Answering system settings
Message alert tone
When the answering system is turned on, the telephone
beeps every 10 seconds to alert you of new messages.
The tone stops when all new messages have
been reviewed.
To change the setting:
using the telephone base:
Press the
MeNu
softkey when the telephone base is
not in use.
Press
/
VoL+
or
VoL-
/
to highlight
Ans. system
,
then press the
SeLeCT
softkey.
Press
/
VoL+
or
VoL-
/
to highlight
Ans sys setup
,
then press the
SeLeCT
softkey.
Press
/
VoL+
or
VoL-
/
to highlight
Msg alert tone
,
then press the
SeLeCT
softkey.
Press
/
VoL+
or
VoL-
/
to select
on
or
off
, then
press the
SeT
softkey to confirm your setting.
using the handset:
Press the
MeNu
softkey when the handset is not
in use.
Press
/
VoL+
/
or
CID
/
VoL-
/
to highlight
ANS. SySTeM
, then press the
SeLeCT
softkey.
Press
/
VoL+
/
or
CID
/
VoL-
/
to highlight
Ans sys setup
, then press the
SeLeCT
softkey.
Press
/
VoL+
/
or
CID
/
VoL-
/
to highlight
Msg alert tone
, then press the
SeLeCT
softkey.
Press
/
VoL+
/
or
CID
/
VoL-
/
to select
on
or
off
, then press the
SeT
softkey to confirm your setting; or press the
BACK
softkey to exit to the
previous menu without making any changes.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
The answering system must be turned on for the message alert tone
to function.
Ans. system
Directory
Call log
SELECT
Del all old
Record memo
Ans sys setup
SELECT
# of rings
Remote code
Msg alert tone
SELECT
MSg ALERT TONE
On
Off
SET