VTech ErisTerminal VSP735A Скачать руководство пользователя страница 13

Страница: 13 / 84

Deskset Installation

Overview

This section assumes that your network infrastructure is established and that

your IP PBX service has been ordered and configured for your location.

Install the phone close to a router or network switch. You can power the phone

using the supplied power adapter or Power over Ethernet (PoE—Class 3). If you

are not using PoE, install the phone near a power outlet not controlled by a wall

switch. The phone can be placed on a flat surface or vertically mounted on the wall.

For customer service or product information, visit our website at

businessphones.vtech.com

or call

1 (888) 370-2006

Network requirements

A switched network topology is recommended for your LAN. The office LAN

infrastructure should use Cat.-5/Cat.-5e cable.

The LAN connections to the deskset(s) should all be wired. However, wireless

connections to other devices (such as laptops) in your office will not impede

performance.

All desksets must reside on a single subnet. A Dynamic Host Configuration

Protocol (DHCP) server is recommended and must be on the same subnet as

the desksets so that IP addresses can be auto-assigned. In most cases, your

network router will have a DHCP server. By default, the deskset has DHCP

enabled for automatic IP address assignment.

Note

: Some DHCP servers have default settings that limit the number of network

IP addresses assigned to devices on the network. You should log in to your

server to confirm that the IP range is sufficient.

If no DHCP server is present, you can assign static IPs to desksets. You can

assign a static IP address using the deskset menus. From the deskset Main

Menu, go to

Admin settings > Network setting > Set static IP

. See the

Administrator and Provisioning Guide for more information. If you do not have a

DHCP server or do not manually assign static IPs, you will not be able to access

the WebUI and/or enable automatic time updates from an NTP server.
A DNS server is recommended to resolve the path to the Internet and to a server

for firmware and configuration updates. If necessary, the system administrator

can also download upgrade files and use the WebUI to update the deskset

firmware and/or configuration settings manually.

Содержание ErisTerminal VSP735A





















































































Результаты поиска

Содержание ErisTerminal VSP735A

Отзывы:

Похожие инструкции для ErisTerminal VSP735A

Бренды по названию

Популярные бренды

VTech ErisTerminal VSP735A, Руководство пользователя

Результаты поиска

Содержание ErisTerminal VSP735A

Отзывы:

Похожие инструкции для ErisTerminal VSP735A

Бренды по названию

Популярные бренды