VTech ErisTerminal VSP715, Руководство администратора и поставки

Страница: 87 / 152

Provisioning Using Configuration Files 87
Back to Contents
VSP715 Administrator and Provisioning Manual
The Provisioning Process
The automatic provisioning process is as follows:
1. Check for new or updated configuration files. For file-checking options, see
“Provisioning” on page 77 and “Resynchronization: configuration file checking” on
page 88 . The VSP715 maintains a list of the last loaded provisioning files. The VSP715
compares its current configuration against the files it finds on the provisioning server.
Checking for update…
appears on the VSP715 screen.
If provisioning has been triggered by the resync timer expiring or by remote
check-sync, the VSP715 checks for updated files after one minute of inactivity.
2. Download the configuration files.
If any file on the provisioning server has changed, the VSP715 treats it as a new file
and downloads it.
Configuring Deskset…
appears on the VSP715 screen.
If the provisioning URL specifies a path only with no filename, then by default the
VSP715 looks for and retrieves the following two files:
 General file: <model>.cfg .
 MAC-specific file: <model>_<MAC Address>.cfg .
The <model> variable is the VTech product model: VSP715, for example.
If the provisioning URL specifies both a path and filename, then the VSP715 retrieves
only the configuration file specified.
3. The VSP715 restarts after one minute of inactivity.
Please wait while the phone
reboots
appears on the VSP715 screen. For more information, see “VSP715 restart”
on page 88 .
During provisioning, the VSP715 reads the configuration file and validates each module
and setting. The VSP715 considers a setting valid if it is:
 a valid data type
 formatted as a valid setting
 within a valid data range
 part of a module that passes an integrity check. That is, the module's settings are
consistent and logical. For example, in the "network" module, if DHCP is disabled,
but no static IP address is specified, the module will fail the integrity check and
none of the settings will apply.
Invalid modules or invalid settings are skipped and logged as ERROR messages in the
system log, but will not interrupt the provisioning process. The system log will include the
module parameters that have not been applied. A recognized module with unrecognized
settings will cause all other settings in that module to be skipped.
A successful configuration or firmware update is reported as an INFO message in the
system log.