Introducing the VSP715
15
VSP715 Administrator and Provisioning Manual
VSP715 Configuration Methods
You can configure the VSP715 using one of the following methods:
From the VSP715 itself, using the menus. The VSP715 menus are best suited to
configuring a few settings, perhaps after the initial setup has been done. For
administrators, the settings available on the VSP715 menus include network
settings, account settings, and provisioning settings. See
. Most of the settings accessible on the VSP715 are
most useful for end users. Through the menu, they can customize the screen
appearance, sounds, and manage calls. For more information, see the VSP715
User Guide.
The Web User Interface, or WebUI, which you access using your Internet browser.
See
. The browser-based interface is easy to
navigate and best-suited to configuring a large number of VSP715 settings at once.
The WebUI gives you access to every setting required for configuring a single
device. You can enter service provider account settings on the WebUI, and set up
provisioning, which will allow you to automatically and remotely update the
VSP715 after initial configuration.
Provisioning using configuration files. Working with configuration files is the best
way to configure multiple phones. There are several methods available to enable
the VSP715 to locate and upload the configuration file. For example, you can
enable the VSP715, when it starts up or reboots, to check for the presence of a
configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the VSP715 automatically downloads the file and
applies the new settings. For more information, see
