Using the WebUI
58
VSP715 Administrator and Provisioning Manual
Network Pages
You can set up the VSP715 for your network configuration on the Network pages. Your
service provider may require you to configure your network to be compatible with its
service, and the VSP715 settings must match the network settings.
The network settings are also available as parameters in the configuration file. See
“"network" Module: Network Settings” on page 108
.
After entering information on this page, click
to save it.
Basic Network Settings
Basic Network Settings
Click the link for each setting to see the matching configuration file parameter in
Module: Network Settings” on page 108
. Default values and ranges are listed there.
If you disable DHCP on this page, you must configure static IP settings for the
VSP715. You must be familiar with TCP/IP principles and protocols to configure
static IP settings.
Setting
Description
DHCP is selected (enabled) by default, which means the
VSP715 will get its IP address, Subnet Mask, Gateway, and
DNS Server(s) from the network.
Static IP
When Static IP is selected, you must enter a static IP
address for the VSP715, as well as addresses for the
Subnet Mask, Gateway, and DNS Server(s).
If DHCP is disabled, enter a static IP address for the VSP715.
Enter the subnet mask.
Enter the address of the default gateway (in this case, your
router).
