VTech ErisStation VCS754A страница 68 Скачать руководство пользователя

Страница: 68 / 74

California Energy Commission battery charging

testing instructions

This telephone is set up to comply with the energy-conserving standards right out of the box. These

instructions are intended for California Energy Commission (CEC) compliance testing only. When the

CEC battery charging testing mode is activated, all telephone functions, except battery charging, will

be disabled.

To activate the CEC battery charging testing mode:

Place all wireless mics (with batteries inserted) into the base unit to make sure they can work

normally with the base unit.

2. Turn the base unit upside down. The end with the display screen and dial pad should be closest to you.

3. Access the battery testing switch, which is located beneath the base unit, midway up and to the right.

The switch is hidden beneath an adhesive cover. Use a pen knife or another small blade to lift off the

cover and access the switch.

4. Use a small screwdriver or another instrument to slide the switch from right to left.

5. Turn the base unit right side up.

6. Remove the batteries from each wireless mic.

7. Insert the battery back into a wireless mic while holding the

MUTE ALL

key on the mic until the mic’s

status indicator shows steady red.

8. Release the

MUTE ALL

key and then press it again immediately.

Place the mic in its charging cradle on the base unit. The mic status indicator should flash red and

green.

10. Repeat steps 6 through 8 for the remaining wireless mics.

After about one minute, the base unit will enter the CEC battery charging testing mode. The base

indicators turn off and all wireless mics are will be deregistered. All telephone functions, except battery

charging will be disabled.
If the base unit has failed to enter this mode, repeat step 5 through step 9 above.

To deactivate the CEC battery charging testing mode:

Turn the base unit upside down and slide the switch back to its original position. The base unit is powered

up as normal. To register the wireless mics again, go to

Main Menu → 3. User Settings → 4. Wireless

microphone → 1. Register

, or follow

the instructions in the VCS754-WM wireless mic Quick Start Guide

For C-ETL compliance only

Mesures de sécurité importantes

Vous devez toujours observer des m

esures de précaution lorsque vous utilisez le Téléphone de

conférence avec microphones sans fil ErisStation, afin d’éviter les risques d’incendie, d’électrocution et de

blessures, incluant ce qui suit :

1.  Lisez et comprenez bien toutes les instructions.
2.  Observez toutes les instructions et mises en garde inscrites sur l’appareil.
3.  Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez pas de nettoyeurs

liquides ni en aérosol. N’utilisez qu’un chiffon doux et légèrement humecté.

4. N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo, d’un évier de cuisine, d’un

bac de lavage ou d’une piscine, ou dans un sous-sol humide ou sous la douche.

5. Ne déposez pas ce téléphone sur un chariot, support ou table chancelants. L’appareil pourrait tomber

et être sérieusement endommagé.

Les ouvertures situées à l’arrière ou sous le socle et le microphone sans fil servent à la ventilation.

Afin d’empêcher la surchauffe, ces ouvertures ne doivent pas être obstruées en plaçant l’appareil sur

un lit, divan, tapis ou autre surface similaires. Ne placez pas cet appareil à proximité d’un élément de

chauffage ni d’une plinthe électrique. De plus, ne l’installez pas dans une unité murale ou un cabinet

fermé qui ne possède pas d’aération adéquate.

7. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur les étiquettes de l’appareil.

Si vous ne connaissez pas le voltage de votre maison, consultez votre marchand ou votre fournisseur

d’électricité.

Содержание ErisStation VCS754A











































































Результаты поиска

Содержание ErisStation VCS754A

Отзывы:

Похожие инструкции для ErisStation VCS754A

Бренды по названию

Популярные бренды

VTech ErisStation VCS754A, Руководство пользователя

Результаты поиска

Содержание ErisStation VCS754A

Отзывы:

Похожие инструкции для ErisStation VCS754A

Бренды по названию

Популярные бренды