VTech ErisStation VCS754A Скачать руководство пользователя | Manualshive

Страница: 66 / 74

background image

60

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device

under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended

to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation. Privacy of communications may not

be ensured when using this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander according to the intended usage of the product. This

product has been tested and found to comply with the FCC criteria. The wireless mic may be safely held

against the face of the user. The base unit shall be installed and used such that parts of the user’s body

other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B)

FCC, ACTA and IC regulations

«
...
64
65
66
67
68
...
»

Содержание ErisStation VCS754A











































































Отзывы:

Нет отзывов

Похожие инструкции для ErisStation VCS754A

Бренд: Kalley Страницы: 32

Бренд: EMPORIA Страницы: 40

Mini Mobile Phones

Бренд: TTS Страницы: 8

Бренд: Alcatel Страницы: 84

Skyroute CL3050 ver 1.2

Бренд: DSC Страницы: 28

T Mobile Z10 LTE

Бренд: Blackberry Страницы: 22

Бренд: Huawei Страницы: 10

Бренд: Zte Страницы: 72

Бренд: Zte Страницы: 74

Бренд: G-Tide Страницы: 24

Бренд: Samsung Страницы: 8

Бренд: Samsung Страницы: 13

Бренд: Samsung Страницы: 117

Бренд: Samsung Страницы: 190

Бренд: Samsung Страницы: 214

Бренд: Ericsson Страницы: 139

Бренд: VERIXAS Страницы: 15

Бренд: Verizon Страницы: 97

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды