VTech ErisStation VCS754A Скачать руководство пользователя

Страница: 58 / 74

Battery

It takes up to 8 hours for the wireless mic battery to be fully charged (the orange

status indicator turns off). Always return the wireless mics to the charging cradles

after use. When it is fully charged, you can expect the following operating times:

Operation

Operating time

While the wireless mic is in use (talking*)

Up to 8 hours

While not in use (standby**)

Up to 70 hours

* Actual talk time will be shorter for calls using HD audio (G.722).

** The wireless mic is not charging or in use.

The battery needs charging when:

• A new battery is installed into the wireless mic.
•

The status indicator on the wireless mic flashes orange.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

• Use only the batteries provided or equivalent. To order a replacement, visit our

website at

http://businessphones.vtech.com

or call

1-888-370-2006

•

Do not dispose of the batteries in a fire. Check with local waste management

codes for special disposal instructions.

• Do not open or mutilate the batteries. Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if

swallowed.

• Exercise care in handling batteries in order not to create a short circuit with

conductive materials.

•

Charge the batteries provided with or identified for use with this product only in

accordance with the instructions and limitations specified in this manual.

• Observe proper polarity orientation between the battery and metallic contacts.
•

To prevent fire or shock hazard, do not expose this product to water or any type

of moisture.

Appendix

Содержание ErisStation VCS754A











































































Результаты поиска

Содержание ErisStation VCS754A

Отзывы:

Похожие инструкции для ErisStation VCS754A

Бренды по названию

Популярные бренды

VTech ErisStation VCS754A, Руководство пользователя

Результаты поиска

Содержание ErisStation VCS754A

Отзывы:

Похожие инструкции для ErisStation VCS754A

Бренды по названию

Популярные бренды