38
End or leave a PTT call
Using a handset or the telephone
base:
For one-to-one PTT calls, both initiating
and destination devices can end the
PTT call. For PTT calls to multiple
devices, the initiating device can end the
PTT call. If any one of the destination
devices leaves the PTT call, the call
continues until all participants or the
initiator hangs up.
Press
CANCEL
or
END
on the handset
or telephone base. The screen shows
Push to talk Ended
.
-OR-
Place the handset in the telephone
base or charger, then the handset
return to idle mode.
NOTE
After
PUSH TO TALK
on the handset or
PTT
on the telephone base is released, the PTT
call remains open for a short time. If no one
presses
PUSH TO TALK
on the handset
or
PTT
on the telephone base
within ten
seconds, the PTT call ends automatically.
Redial
The base and each handset store the last
10 telephone numbers dialed. When there
are already 10 entries, the oldest entry is
deleted to make room for the new entry.
Review a redial list entry
Press
REDIAL
on the handset or
telephone base when idle.
Scroll or press
REDIAL
repeatedly
until the desired entry displays.
Dial a redial list entry
Press
REDIAL
on the handset or
telephone base when idle.
Scroll or press
REDIAL
repeatedly
until the desired entry displays.
Press
/HOME
,
/CELL 1
,
/CELL 2
,
or to dial.
-OR-
Press
/HOME
or to use the home
line.
-OR-
Press
/CELL
to use the cell line.
Press
REDIAL
to enter the redial list.
Press , or
REDIAL
repeatedly
on the handset; or press
CALLER ID /
or
PHONEBOOK /
or
REDIAL
repeatedly to browse until the desired
entry displays.
Press
SELECT
to dial the displayed
number.
Delete a redial list entry
Press
REDIAL
to enter the redial list.
Press , or
REDIAL
repeatedly
on the handset; or press
CALLER ID /
or
PHONEBOOK /
or
REDIAL
repeatedly to browse until the desired
entry displays.
When the handset displays the number
you want to delete, press
DELETE
.
1.
2.
1.
2.
3.
1.
2.
1.
2.
1.
2.
•