
9
Install and charge the battery
Install the battery as shown below.
NOTES
Use only supplied battery.
If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
•
•
Connect the power adapter to the
telephone base and an electrical
outlet not controlled by a wall switch.
4.
3. Plug the telephone line cord (or
Plug the telephone line cord (or
DSL
filter
) into the wall jack. Align the
holes on the back of the telephone
base with the standard wall plate.
Slide the bracket down until it clicks
securely in place. Connect the power
adapter to the telephone base and an
electrical outlet not controlled by a
wall switch.
2 Rotate the wall mount bracket down
to wall mount position and then push
it into the telephone base until it clicks
into place.
1
3
THIS SIDE UP