15
All devices that are connected
to the telephone base are
disconnected until the pairing
process is completed.
6. Press
NEXT
to turn on the telephone
base discoverable mode. The screen
displays
Set cell to search base: VTech
DS6291 PIN: 0000
. Promptly turn on
the Bluetooth feature of your cell phone
and search for or add new devices.
7. Once your cell phone finds your
VTech phone (
VTech DS6291
),
press the appropriate key on your
cell phone to continue the pairing
process.
Your cell phone may require
a passcode. In this case, the
telephone base displays
Check
cellular. ENTER PASS CODE
.
Enter the cell phone passcode
(typically
0000
) into the telephone
base and press
SET
.
Enter the PIN of the telephone
base (the default PIN is
0000
) into
your cell phone to continue the
pairing process if required. The
telephone base displays
Adding
Cell Phone A
.
8. When a device is successfully
connected,
the telephone base
displays
Cell Phone A is added
and connected to base
and
the
corresponding status icon
(
1
or
2
)
displays. The corresponding device
light on the telephone base (
CELL 1
or
CELL 2
/
HEADSET
) turns on.
When the cell phone is successfully
paired and connected to the telephone
base, the corresponding status icon
(
1
or
2
) displays. The corresponding
device light (
CELL 1
and/or
CELL 2/HEADSET
) turns on.
•
•
•
NOTES
The pairing process may take up to one
minute. If the pairing process fails, turn
off the Bluetooth feature on your cell
phone and on the
DS6291/DS6292
by
pressing
CELL 1
/
CELL 2/HEADSET
.
Then repeat the steps above to pair and
connect again. In some cases, it may
take you a few attempts to complete the
pairing process.
The steps for the pairing process may
vary for different cell phones. If this
happens, follow the prompts on your
cell phone and your
DS6291/DS6292
to
complete the pairing process.
If you have trouble pairing your cell
phone, it may not be compatible with
your DS6291/DS6292. Check the
Bluetooth compatibility list at
www.vtechcanada.com.
•
•