background image

9.  Do not allow anything to rest on the 

power cord. Do not install this product 
where the cord may be walked on.

10.  Never push objects of any kind into 

this product through the slots in the 
telephone base or handset because 
they may touch dangerous voltage 
points or create a short circuit. Never 
spill liquid of any kind on the product.

11.  To reduce the risk of electric shock, 

do not disassemble this product, but 
take it to an authorized service facility. 
Opening or removing parts of the 
telephone base or handset other than 
specified access doors may expose 
you to dangerous voltages or other 
risks. Incorrect reassembling can cause 
electric shock when the product is 
subsequently used.

12.  Do not overload wall outlets and 

extension cords.

13.  Unplug this product from the wall 

outlet and refer servicing to an 
authorized service facility under the 
following conditions:
•  When the power supply cord or 

plug is damaged or frayed.

•  If liquid has been spilled onto the 

product.

•  If the product has been exposed to 

rain or water.

•  If the product does not operate 

normally by following the operating 
instructions. Adjust only those 
controls that are covered by the 
operation instructions. Improper 
adjustment of other controls may 
result in damage and often requires 
extensive work by an authorized 
technician to restore the product to 
normal operation.

•  If the product has been dropped 

and the telephone base and/or 
handset has been damaged.

•  If the product exhibits a distinct 

change in performance.

14.  Avoid using a telephone (other than 

cordless) during an electrical storm. 
There is a remote risk of electric shock 
from lightning.

15.  Do not use the telephone to report 

a gas leak in the vicinity of the leak. 
Under certain circumstances, a spark 
may be created when the adapter 
is plugged into the power outlet, 
or when the handset is replaced in 
its cradle. This is a common event 
associated with the closing of any 
electrical circuit. The user should 
not plug the phone into a power 
outlet, and should not put a charged 
handset into the cradle, if the phone is 
located in an environment containing 
concentrations of flammable or 
flame-supporting gases, unless there 
is adequate ventilation. A spark in 
such an environment could create a 
fire or explosion. Such environments 
might include: medical use of oxygen 
without adequate ventilation; industrial 
gases (cleaning solvents; gasoline 
vapors; etc.); a leak of natural gas; etc.

16.  Only put the handset of your 

telephone next to your ear when it is in 
normal talk mode.

17.  The power adapter is intended to be 

correctly oriented in a vertical or floor 
mount position. The prongs are not 
designed to hold the plug in place if 
it is plugged into a ceiling, under-the-
table or cabinet outlet.

18.  For pluggable equipment, the 

socket-outlet shall be installed near 
the equipment and shall be easily 
accessible.

Содержание DS6251













































































Отзывы: