VTech DS6251, Руководство пользователя

Страница: 24 / 76

16
To access a number in the redial list
while on a call:
1. Press
REDIAL
on the handset.
-OR-
Press
OPTION
on the telephone base.
Press q or p to choose Redial last# ,
then press SELECT .
2. Press q , p or REDIAL on the handset
repeatedly to browse to the desired
entry.
3. Press DIAL to dial the displayed
number.
• Press OFF on the handset or CANCEL on the
telephone base to exit redial list, phonebook
or caller ID log when you are on a call.
Find handset
Use this feature to find all system handsets.
• Press
PAGE on the telephone base
when not in use. All idle handsets ring
and display
** Paging ** .
To end paging:
• Press PAGE again or STOP on the
telephone base.
-OR-
• Press LINE 1 , LINE 2 , , OFF or any of
the dialing key on the handset.
-OR-
• Place the handset in the telephone base
or charger.
• Press MUTE to turn off the ringer of a
handset temporarily. Paging tone continues
on the other handset.
• Do not press and hold
PAGE
for more
than four seconds. It may lead to handset
deregistration. If the handset displays To
register, see user manual , refer to the
Frequently asked questions section to register
the handset back to the telephone base.
Redial list
Each handset stores the last 20 telephone
numbers dialed. Entries are shown in
reverse chronological order. When there
are already 20 entries, the oldest entry is
deleted to make room for the new entry.
Review the redial list
1. Press REDIAL on the handset or
REDIAL on the telephone base when
the phone is not in use.
2. Press q , p or REDIAL repeatedly
on the handset or q or p on the
telephone base to browse.
Dial a redial list entry
1. Search for the desired entry in the
redial list (see Review the redial list ).
2. When the desired entry displays, press
LINE 1 , LINE 2 , or on the handset
or LINE 1 , LINE 2 on the telephone
base to dial.
-OR-
1. Press LINE 1 , LINE 2 , or on the
handset or LINE 1 , LINE 2 on the
telephone base when the phone is not
in use.
2. Press
REDIAL
on the handset.
-OR-
Press
OPTION
on the telephone base.
Press
q
or
p
to choose
Redial last#
,
then press SELECT .
3. Press q or p until the desired entry
displays, then press DIAL to dial.
Save a redial list entry
1. Search for the desired entry in the
redial list (see Review the redial list ).
2. When the desired entry appears,
press SAVE . The screen displays EDIT
NUMBER .