VTech DS6251, Руководство пользователя, Страница: 52 / 76

44
About the built-in answering
system and voicemail service
For message recording, your telephone
has a built-in answering system for each
telephone line, and it also supports
voicemail service offered by your
telephone service provider (subscription is
required, and fee may apply).
The main differences between them are:
Category
Built-in
answering
system
Voicemail
from
telephone
service
Storage Messages are
stored in the
telephone
base.
Messages are
stored in a
server or system
provided by
your telephone
service
provider.
Your messages
will not be
deleted
automatically.
You have to
delete your
messages
manually.
Your messages
may be
automatically
deleted after a
period of time.
Contact your
telephone
service
provider for
more details.
Method
to retrieve
messages
When you
received new
messages,
the screen
displays XX
New Msg ,
and the
light on the
telephone
base flashes.
When you
received new
messages,
the handset
displays
1
and New
voicemail .
Method
to retrieve
messages
To retrieve
messages,
usually there
are two ways:
• Press
on the
telephone
base; or
• Access
remotely
with an
access code.
To retrieve
messages, you
need an access
number and/
or a passcode
provided by
your telephone
service
provider.
Set your built-in answering
system
The answering system can record and
store up to 99 messages. Each message
can be up to three minutes in length.
The total storage capacity for the
announcement, messages and memos
is approximately 22 minutes. The actual
recording time depends on individual
message characteristics.
If the memory is full, the answering system
announces, “
Memory is full, ” before
message playback. The device screen
displays
Rec mem full in idle mode.
Once the memory is full, you cannot
turn the answering system back on if it
has been turned off, nor can you record
new messages until old ones have been
deleted.
Memory full displays if you want
to turn on the answering system on the
handset but there is no memory.
Your answering system allows you to set
your announcement, to save and delete
messages, activate call screening, to set
number of rings before pick up, and to
access remotely.
Turn the answering system on or off
The answering system must be turned on
to answer and record messages.
If you turn off the answering system and
you change any setting in the answering
system setup menu, the answering system
automatically turns on again.
When the answering system is turned
on, the corresponding light on the
telephone base turns on and
ANS ON
displays on the handset screen.