ECU converter PBS Version: 1.3
Page 40/43
2.9.3.2
FUEL-CONSUMPT.
The VSpeak ECU converter can calculate the current fuel flow (F-FLOW) and the fuel
consumption (FUEL) on the basis of the turbine pump voltage. The required parameters can be
adjusted in this menu.
In points 20 and 21: "FL / 1.5V" the fuel flow in ml/min is associated to the pump voltage of
1.5V. Same at "FL / 3.0V" but to 3.0V.
Tips for determining the fuel flow rate can be found in the appendix of these operating
instructions.
FUELTANK SIZE is the capacity of the main tank in ml.
23:TAXI TANK
For models where a taxi tank is plugged into the main tank until the model is lifted off, set
"Taxi Tank = ON". If the turbine is "Running", then when THROTTLE = 80% is exceeded
for the
second time
, the FUEL will "reset", ie the displayed FUEL is only once set to "full"
(the value set at " FUELTANK SIZE ") again at this time.
