VSpeak ECU converter PBS, Руководство пользователя

Страница: 11 / 45

ECU converter PBS Version: 1.3 www.VSpeak-modell.de
Page 11/43
2.2 Multiplex MLink (MSB)
The MSB (Multiplex Sensor Bus) is only uni-directional. You can only see the telemetry data,
but you cannot change parameters of the PBS turbine.
2.2.1 Address-Assignment
The VSpeak ECU Converter at delivery uses following addresses:
PBS
Turbine
address
comment
FUEL Alarm
2
Consumed Fuel in ml
BATT Alarm
3
Battery Voltage in V
EGT Alarm
4
Exhaust Gas Temperature in °C
RPM Alarm
5
Turbine RPM
STATUS
6
Turbine Status
THROTTLE
7
Throttle Value in %
PUMP
8
Pump Voltage in V
FUEL-FLOW
9
Fuel Flow in ml
EGT-PEAK
OFF
max Exhaust Gas Temperature in °C
RPM-PEAK
OFF
max Turbine RPM
PUMP-PEAK
OFF
max Pump Voltage in V
2.2.2 Turbine-Status
To display the turbine status there are various
preset messages in the radio or in the external
display. These do not match the normal
PBS turbine messages 1:1, so the closest match
has been chosen. Please refer to the table on the
left.
As "Error"
-OFF-
are all other errors not listed
in the table which can lead to a shutdown of the
turbine or not even allow it to start. (turbine
flameout).
PBS
Turbine Status
STOP
Manual
Th : I d l e
Stby/START
Th : -Re l
AccelrDly
TEST
PreHeat1
F IRE
Ignite...
START
acceler.
I DLE
RUN (reg.)
COOL
Cooling
LOCK
-OFF-
Error -OFF-