VSpeak ECU converter PBS, Руководство пользователя

Страница: 18 / 45

ECU converter PBS Version: 1.3 www.VSpeak-modell.de
Page 18/43
2.3.4.1 Alarms
Settings
Value range Step size Signal tone
100 . . . 2500 ml 10 ml U
5.0 . . . 12.0 V 0.1 V P
400 . . . 995
°C
5 °C H
20.0 . . . 99.9
x 1000rpm
100 rpm T
-10 / -1 / OFF E
Upon delivery, the warning thresholds are set as shown in the picture.

F-RES
The alarm Fuel Reserve is signaled if the fueltank size is exceeded less fuel consumption set
at F - RES.
The alarm stops as soon as a status message is transmitted, i.e.: LOCK, COOL or ERROR.
In addition, the alarm can also be acknowledged by sending a throttle value below 10% for
a moment.
F-RES = OFF -> Alarm is disabled

BATT
The alarm BATT is signaled if the turbine battery voltage falls below the value set at BATT.
BATT = 5.0V -> should never occur , alarm is thus disabled

EGT
The alarm EGT is signaled if the temperature exceeds the value set at EGT.
EGT = 995°C -> should never occur , alarm is thus disabled

RPM
The alarm RPM is signaled if the rotation speed falls below the minimum rotation speed.
Speed monitoring is started when the speed exceeds the minimum speed and ends
at PUMP = 0,0V
RPM = OFF -> Alarm is disabled

ERROR = "turbine flameout"
"Error -10" are all other errors not listed in the table
which can lead to a shutdown of the turbine or not
even allow it to start.
If an alarm ERROR = -10 is programmed in the
transmitter a "turbine flameout " can safely be
signaled.
PBS
Turbine Status
ERROR
STOP
0
Th : I d l e
0
Th : -Re l
0
TEST
0
F IRE
0
START
0
I DLE
0
COOL
0
LOCK
- 1
Error
- 10