VoxBox Lite Edition, Руководство пользователя

Страница: 29 / 127

DTMF Programming
Installation and Programming Manual 3-5
Table 3-1 PBX Parameter Commands (continued)
OPERATION COMMAND DEFAULT
Pause before and
after external
access code *341 + X
where X is the length of the pause in seconds (0-9)
2 seconds
Transfer mode for
all extensions
*350 + X + Y
X = 1; All extensions except the operator
X = 2; Operator extension only
Y = 0; Non Supervised
Y = 1; Supervised Mode
Y = 2; Semi Supervised mode
Non
supervised
Day operator,
Night operator,
Fax and
Supervisor’s
extension numbers
*360 + X + YYYY + #
where:
X = 1; Day operator
X = 2; Night operator
X = 3; Fax extension
X = 4; Supervisor extension
One mailbox can be defined as Supervisor. When
storage memory reaches 80% of its capacity, a
message is sent to this mailbox indicating the
situation.
YYYY = Corresponding extension number.
0
0
–
–
Delete the
extension
assignments
*360 + X + #
where:
X = 1; Day operator
X = 2; Night operator
X = 3; Fax extension
X = 4; Supervisor extension
Volume level
*369 + X
where:
X = volume level (0-9), 9 = Loudest
5
Flash-1 *370 + XXX
where XXX is a 3-digit number (000-980) in steps
of 20 ms.
Example: *370 300 sets Flash-1 to 300 ms
600 ms
Flash-2 Flash-2 is fixed at 1200 ms.
Flash-2 is used in some PBX’s for Recall from No-
Answer or Busy Codes. 1200 ms