
Assembly instructions VOSSOBW501
SG sensor
, Page 8 of 22
Step 5
Grind the surface fine by hand by using abrasive paper with
grain 240.
This step should be performed on an area at least as
large as the sensing part, ca. 30 mm x 20 mm.
Fig. 10: Fine grinding of the surface by hand by using
abrasive paper with grain 240
Step 6
Final result of the grinding process.
Fig. 11: Finally grinded surface
Step 7
Wipe clean the entire grinded surface with cleaning solvent
and a cleaning cloth.
Fig. 12: Cleaning of surface
!