Assembly instructions VOSSOBW501
SG sensor
, Page 7 of 22
Step 2
Polish the surface by using drilling machine with grain 60.
Fig. 7: Polishing the surface using drilling machine with
grain 60
Step 3
Continuously polish the surface by using drilling machine
with grain 120.
Fig. 8: Polishing the surface using drilling machine with
grain 120
Step 4
Grind the surface fine by hand by using abrasive paper with
grain 120.
This step should be performed on an area at least as
large as the sensing part, ca. 30 mm x 20 mm.
Fig. 9: Fine grinding of the surface by hand by using abrasive
paper with grain 120
!