![Vorwerk kobold VK150 Скачать руководство пользователя страница 84](http://html1.mh-extra.com/html/vorwerk/kobold-vk150/kobold-vk150_instruction-manual_1051146084.webp)
83
Troubleshooting
Fault
Possible cause and correction
The Hard floor
cleaner has switched
off by itself; the red
operation indicator
“STOP” is flashing
while the Vacuum
cleaner switches off
at the same time.
Moisture has been sucked in.
•
Switch off the Vacuum cleaner.
•
After the device has dried completely, switch
on the Vacuum cleaner and close the secondary
air flap of the Hard floor cleaner.
•
It is possible that this step will need
to be repeated several times.
The Hard floor
cleaner is making
noises.
It is possible that the device has not been closed correctly
or that the cloth holder has not been mounted correctly.
•
Check if the side cover
4
is present and properly
closed. If not, insert and close the side cover.
•
Check the seat and the catch mechanism of the cloth holder.
The vacuuming
result of the Hard
floor cleaner is
insufficient.
It is possible that the Sealing lip frames are dirty and jammed.
•
Remove and clean the sealing lip frames.
It is possible that the Kobold MF370 Cleaning cloth
has been fixed in a diagonal position on the cloth
holder and collides with the sealing lip frames.
•
Check whether the Cleaning cloth is
evenly fixed in the cloth holder.
The secondary
air flap does not
close/does not
remain closed.
It is possible that the holding magnet is dirty.
•
Clean the surface of the magnet.
The Hard floor
cleaner causes
streaks/marks
on the floor.
It is possible that the supporting feet touch the floor.
•
In this case, remove the supporting feet
14
.
KoBold SP530
hard Floor Cleaner
Fig. 5.4 Reinserting the side cover
4
Fig. 5.5 Removing the supporting feet
14
Содержание kobold VK150
Страница 1: ...Instruction manual Kobold VK150 Vacuum cleaner and accessories...
Страница 5: ......