7
• All’installazione occorre prevedere un’interruttore onnipolare con distanza
di apertura dei contatti uguale o superiore a 3 mm.
Installazione per SCNR/M
1° Smontare il fondo (A) ed usarlo come dima per contrassegnare nella
parete, la posizione dei due fori di fissaggio (Fig. 1).
2° Praticare i fori e fissare il fondo (A) mediante due tasselli ad espansione.
3° Introdurre nel fondo (A) (attraverso le apposite aperture da praticare) i
conduttori da collegare all’apparecchio ed alla linea d’alimentazione,
lasciandone sporgere la lunghezza ottimale per un facile fissaggio alla
morsettiera (Fig. 1).
4° Fissare al fondo (A) il supporto cablaggio intermedio (B) mediante le
relative viti (Fig. 1).
Eseguire la connessione alla morsettiera del regolatore secondo lo
schema (Fig. 2). Serrare i cavi con le viti e i serracavi in dotazione (Fig. 4).
5° Qualora necessario è possibile variare la minima velocità manovrando il
trimmer incorporato (Fig. 3) mediante un cacciavite.
La rotazione in senso antiorario comporta un aumento della velocità,
quella in senso orario una riduzione.
6° Definita la posizione ottimale del trimmer, verificare che il motore si avvii
regolarmente.
7° Riposizionare definitivamente il coperchio (C) e stringere le viti relative
(Fig. 4).
Uso (Fig. 5)
a) Premere il tasto (D) (accensione lampada spia) per avviare il ventilatore.
b) Ruotare la manopola (E) per selezionare la velocità desiderata.
c) Carico massimo regolabile 450 W.
Il gruppo comandi è dotato di fusibile 5 x 20 da T2, 5A-250V IMQ (Fig. 3).
Installazione per SCNR/M + Kit Built-in
(KIT SCB cod. 22481)
1° Smontare il fondo (A) del prodotto (Fig. 1).
2° Murare a filo di parete il fondo (H) del KIT SCB (Fig. 1bis).
3° Introdurre nel fondo (H) (attraverso le apposite apertura da praticare) i
conduttori da collegare all’apparecchio ed alla linea d’alimentazione,
lasciandone sporgere la lunghezza ottimale per un facile fissaggio alla
morsettiera (Fig. 1bis).
4° Fissare al fondo (H) il supporto cablaggio intermedio (B) mediante le
relative viti (Fig. 1bis).
Eseguire la connessione alla morsettiera del regolatore secondo lo
schema (Fig. 2bis). Serrare i cavi con le viti e i serracavi in dotazione
(Fig. 3bis).
5° Qualora necessario è possibile variare la minima velocità manovrando il
trimmer incorporato (Fig. 3) mediante un cacciavite.
La rotazione in senso antiorario comporta un aumento della velocità,
quella in senso orario una riduzione.
6° Definita la posizione ottimale del trimmer, verificare che il motore si avvii
regolarmente.
7° Riposizionare definitivamente il coperchio (C) e stringere le viti relative
(Fig. 3bis).
Uso (Fig. 6)
a) Premere il tasto (D) (accensione lampada spia) per avviare il ventilatore.
b) Ruotare la manopola (E) per selezionare la velocità desiderata.
c) Carico massimo regolabile 450 W.
Il gruppo comandi è dotato di fusibile 5 x 20 da T2, 5A-250V IMQ (Fig. 3).
Содержание 22481
Страница 3: ...3 Fig 4 Fig 5 ...
Страница 5: ...5 Fig 3 bis Fig 6 ...
Страница 22: ...22 ...
Страница 23: ...23 ...