27
The transmitting part with a motion sensor is fixed on the LEFT block of the rear axle (Fig. 21).
The cyclocomputer with holder is inserted in the inner pocket in the left fender of the stroller/baby buggy allowing
turning it for comfortable monitoring of the data by the transported person.
The transmitting part is supplied from LR 44 batteries (2 pcs), the cyclocomputer from one CR 2032 battery.
9.2 Mosquito net, windstopper and waterproof
9.2.1. Mosquito net (Tropico)
It is possible to fix a mosquito net, windstopper and waterproof to each stroller. The mosquito net is fixed with Velcro the
other end of which is on the bottom part of the front edge of the hood. Place the mosquito net (Fig. 43, point
1
) on the
inner other part of the Velcro on the hood (Fig. 43). Then place the front side over the front arch of the stroller frame
(Fig. 44) and fix the rear corners by turning the end tapes around the stroller frame (the vertical part of the extended
handle frame) and snap (Fig. 43). In the middle of the longest sides of the mosquito net, snap the snap on the tape onto
the counterpart located on the side of the stroller seat (Fig. 44).
The manufacturer supplies a uniform model for all S size stroller/baby buggy variants.
WARNING
: An absence of the mosquito net may expose the passengers to insects, flying stones or other
debris.
Figure 43
