10
1. Assembly and disassembly of the stroller/baby buggy
The stroller uses quick-acting components so both its assembly and disassembly can be performed in a few dozens of
seconds.
1.1 Rear axle
The rear wheels are fixed using quick-acting half-axles. By pressing the cap on one end of the axle the lock on the
opposite side is released and the axle can be slid in/out the rear wheel hub.
Figure 2
1.1.1 Assembly
is to be started by inserting the half-axle in the rear wheel hub
–
slide the axle fully in the rear
wheel hub.
Figure 3
Figure 4
A
–
press the cap to unlock the lock and
B
–
slide the axle in to rear axle block.
Figure 5
Figure 6
A
B
1
–
Push
2
–
Locking balls release
