14
Turn the extension in the hole so that the pin (protruding dowel screw, Fig. 13 and Fig. 14, point
2
) engages in the
recess in the front axle block and fully slide the extension in the block.
Figure 13
Figure 14
Turn both horizontal clamps to the appropriate position so that the levers do not collide with the levers of vertical clamps.
Lock both horizontal quick-acting clamps.
1.2.2 Disassembly of the front fork with wheel
Loosen both horizontal quick-acting clamps (Fig. 11, point
3
) and (Fig. 12).
Take the front fork extension out of the front axle block.
1.2.3 Removing the front wheel from the fork
The 14” front wheel is fixed to the fork with a quick
-acting axle. For transport or service reasons, it may be necessary to
remove the wheel from the fork.
Figure 14 LOCKED
Figure 15 RELEASED
Loosen the lever of the quick-acting axle. The axle ends engage in the recess in the fork, so even if the lever loosens
accidentally during ride, the wheel will not fall out of the fork.
