V
OLTECH
AC
I
NTERFACE
U
SER
M
ANUAL
98-072
ISS
7
PAGE
31
4, Add a VOCX test, with the same 19/A and 17/B nodes used for BOTH Energised and Measured terminals
In this example we have programmed a sequence of 3 VOCX tests at 200, 400 and 600 Volts
5, Check your AC SOURCE settings in SET UP are correct.
6, Run the program from the AT Editor.
The unit should apply the requested voltages to the terminals, trim to match the required voltages, and then
report the measurement.
The results will be returned to the Editor , proving that the voltages were generated correctly.
