V
OLTECH
AC
I
NTERFACE
U
SER
M
ANUAL
98-072
ISS
7
PAGE
22
[
If you are using the universal fixture (# 91-186) , the AC Interface output leads can be stacked into the
sockets on their required nodes
Below shows a simple step up with the AC interface connected to the power terminals on nodes 17+19
Kelvin leads are then used to connect to the unit under test.
Please remember that the
full signal path
should be rated for the Current and Voltage you expect.
In this case the 78-060 10A kelvin leads have been used.
