VOLTCRAFT VC-530, Инструкция по эксплуатации

Страница: 42 / 104

e) Continuity check

Make sure that all the circuit parts, switches and components
and other objects of measurement are disconnected from the
voltage and discharged.
- Turn the measuring device on at the rotary switch and select measuring range
.
- Plug the measuring lines into the measuring device as specified under Item Resis-
tance measurement.
- To activate the acoustic continuity tester function, press the MODE key (7) until
the „Continuity check“ symbol appears on the display.
- A measuring value of less than 70 Ω is identified as continuity; in this case a
beep sounds.
- As soon as „OL“ (overload) appears on the display, you have exceeded the
measuring range or the measuring circuit has been broken.
- After measuring, remove the measuring leads from the measuring object and
turn the measuring device off. Turn the rotary switch to „OFF“.
f) Capacity measurement

Make sure that all the circuit parts, switches and components
and other objects of measurement are disconnected from the
voltage and discharged.
With electrolyte capacitors, observe the polarity.
- Turn the measuring device on at the rotary switch and select measuring range
CAP.
- Plug the measuring lines into the measuring device as specified under Item Resis-
tance measurement.
- Um die Funktion der Kapazitätsmessung beim VC-531 zu aktivieren, drücken
Sie dreimal die MODE-Taste (7).
- The display shows the unit „nF“.
42