37
• When working with power supplies or chargers, do not wear any metallic or conductive
chains, bracelets, rings etc. Never connect the power supply or charger with humans
or animals.
• Check the product for damage(s) each time before use. If you discover any damages,
do not use the product. Disconnect the power supply and unplug the mains adapter
from the wall outlet. Then bring the product to a specialised workshop.
• Use only a proper mains socket (230V~/50Hz) connected to the public power supply.
• Do not pull the mains adapter out of the wall outlet by its cable!
• The plug must be pulled out of the socket under the following conditions:
- before cleaning the product
- during a thunder storm
- if the product is not being used over a long period.
• Make sure that the product is provided with adequate ventilation during operation. Do
not cover the ventilation openings with magazines, blankets, curtains or similar. Keep a
minimum distance of approx. 15 cm from other objects.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Make sure there are no devices with strong electric or magnetic fields such as
transformers, motors, cordless telephones and radio-controlled devices in the vicinity
of the product as these can influence the product.
• Do not operate the charger in places or rooms with unfavourable ambient conditions.
This can damage the sensitive electronics found inside the charger and can potentially
pose life-threatening risks. Poor ambient conditions are:
- High humidity (> 80 % relative, condensation)
- Humidity, dust, flammable gases, solvent vapours, benzine
- High ambient temperatures (> approx. +50 ºC)
- Electromagnetic fields (motors, transformers, audio systems for model building etc.)
or electrostatic fields
• The product should not be used immediately after it has been brought from an area of
cold temperature to an area of warm temperature. Condensed water might destroy the
product. Wait until the product adapts to the new ambient temperature before use.
Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert
or at a qualified shop.
