Display
message
• Excess voltage protection error
message.
Voltage at the output is greater
than the set voltage setpoint.
1. Switch the device off.
2. Disconnect consumers.
3. Switch the device back on.
4. If the error persists, contact
customer service.
Display
message
• Excess current error message.
The current at the output is
greater than the set current
setpoint.
1. Switch the device off.
2. Disconnect consumers.
3. Switch the device back on.
4. If the error persists, contact
customer service.
Display
message
• Overheat error message.
System temperature is too high.
1. Switch the device off.
2. Disconnect consumers.
3. Allow the device to cool down for
30 minutes.
4. Switch the device back on.
5. If the error persists, contact
customer service.
Display
message
• Voltage limit warning message
• The voltage setpoint cannot be
increased further because the
set voltage limit value has been
reached.
• If necessary, increase the the
voltage limit value
Display
message
• Current limit warning message
• The current setpoint cannot be
increased further because the
set current limit value has been
reached.
• If necessary, increase the the
current limit value
Any repair work other than that described above must be carried out by an authorised
technician. If you have questions about using the device, please contact our technical
support team.
49
