36
The information in the lower display can be toggled with the “
” button (5). The following
displays are available:
Current time of day
Energy in kWh (“ENERGY”)
Costs (“COST”)
Energy in kWh (“ENERGY”)
Operating time (“TIME”)
CO
2
/greenhouse gas (“GHG/CO
2
”)
b) Starting, using, closing the set-up mode
• The set-up mode can be started and closed by pressing the “SET” button (1) for about
3 seconds each time. The settings are applied when closing.
Alternatively, if you do not press any button for one minute, the set-up mode is closed
automatically and the setting made so far are also applied.
• The functions are toggled by briefly pressing the “
” button (5) unless a setting flashes.
Following functions are available:
- Time
- Electricity tariff 1 and 2 (and their starting time)
- CO
2
emission
- Alarm for overloading
- Delete mode
• If the setting of the function shown in the display is to be changed, briefly press the “SET”
button (1).
Then, change the flashing value with the “
” (4) or “
” (5) button and press the
“SET” button (1) to get to the next input or to complete input (depending on the function).
