VOLTA FLEX PACK, Руководство пользователя

Страница: 13 / 36

VPS-DOS-TR-04-E / Rev 01
6-January-2022
Volta Power Systems
Page 13 of 34
VOLTA SYSTEM ON/OFF PUSHBUTTON
Turning On the Volta System
Press the On/Off pushbutton to turn on the Volta System and power your
vehicle’s electrical systems and devices� When the On/Off button is pressed to
turn on the Volta System, a 2-5 second system check occurs. If all systems checks
are successful, the Flex Pack’s internal contactor engages, supplying power to all
Volta components, turning on the Volta System�
Do not repeatedly press the pushbutton. After pressing the button, wait 30
seconds for all system checks to occur before pressing the button again�
Turning Off the Volta System
Press the On/Off pushbutton to turn off the Volta System� After pressing the
pushbutton to turn off the Volta System, a few seconds will pass before the
pushbutton LED turns off and the Touchscreen shuts down, signaling that the
Volta System is turned off�
If the Volta System is off, and a charge source is detected, the Volta System
enters Charge Only Mode� Refer to Charge Only Mode below for additional
details�
Charge Only Mode
If the Volta System is turned off (no pushbutton LED indicator and Touchscreen
is off), the system enters Charge Only Mode in the following situations:
•
Vehicle is connected to shore power�
• Vehicle is connected to a generator�
• Vehicle is turned on�
While in Charge Only Mode, the Pushbutton LED flashes green continuously,
and the Volta System allows the Flex Pack to charge, but all system loads are
disabled� You will not be able to operate vehicle electrical systems while in
Charge Only Mode� Press the On/Off pushbutton to turn the Volta System on for
full functionality�
Pushbutton