VOLTA FLEX PACK, Руководство пользователя

Страница: 30 / 36

VPS-DOS-TR-04-E / Rev 01
6-January-2022
Volta Power Systems
Page 30 of 34
INSTALLING MYVOLTA BLUETOOTH MODULE
The myVolta Bluetooth Low Energy (BLE)
device enables users to access their Volta
system’s information from a Bluetooth-con-
nected device�
You can purchase the Bluetooth module at
www�VoltaPowerSystems�com�
The kit includes:
• Bluetooth Communication Module
• Adapter Harness
The Bluetooth module integrates with the
existing State-of-Charge (SOC) gauge or
Touchscreen in your vehicle� To install, refer to
the video on www�VoltaPowerSystems�com
or follow these instructions and the graphic
on the following page:
1. Locate the SOC gauge or Touchscreen, then turn off the Volta System
via the On/Off button� Wait a few seconds for the system to shut down�
2. When the SOC gauge/Display and On/Off pushbutton are no longer
illuminated, remove any mounting hardware to access the back of the
SOC gauge/Display�
3. Disconnect the SOC gauge/Touchscreen connector� NOTE: Ensure
you disconnect the SOC gauge/Touchscreen cable and not the On/Off
pushbutton connector�
4. Connect the Bluetooth adapter harness to the Bluetooth module and
between the SOC gauge/Touchscreen connections�
The adapter harness has three unique connections, ensuring the
connections cannot be made in the wrong order or position�
5. Feed the cables back into their original location�
6. Remove the top layer of tape over the adhesive tape on the Bluetooth
module, then adhere the Bluetooth module to a suitable surface�
7. Reinstall the SOC gauge and On/Off button unit using the four screws�
8. Press the On/Off button to turn on the Volta System�
9. Follow the instructions in the myVolta app to pair your mobile device
with the Volta system�
Bluetooth Module